WiebeTech Forensic LabDock Bedienungsanleitung PDF herunterladen (Seite 7)

WiebeTech

F o r e n s i c L a b D o c k U s e r M a n ua l ( A9 - 0 0 0 -0 0 1 1 R E V 1 . 0 ) - 7 -

3.2.3 Connect the IDE and power cables to your

hard drive. Attach the free end of the IDE ribbon

cable to the back of the hard drive. The

connector is keyed to insert only one way.

Next, attach the 4-pin power

connector from the dock into the

back of the hard drive. As with

the IDE cable, the power

connector will only fit one way.

3.3 USB Drives (FLDu model only)

Forensic LabDock model FLDu is equipped with a write-blocked USB connection for attaching a USB

thumb drive, flash media, or drive enclosure.

3.3.1 USB Thumb Drives

Plug the device into the USB port. If the device has an

on/off switch, turn it on. There is a “Remount” button

for a few instances where USB WriteBlocker might not

be recognized by the computer. If that is ever the

case, cycle the device’s power, then press the

“Remount” button.

3.3.2 USB Drive Enclosures

The write-blocked USB port on Forensic LabDock is designed primarily to work with USB

thumb drives. However, it will also work with many hard drive enclosures that have USB

connections. Such products must be seen by the computer’s OS as a “USB Mass

Storage Device,” and cannot be compound USB devices (i.e. products seen by the OS as

more than one physical device).

You may find this feature useful for viewing the contents of a drive enclosure to

determine whether it contains digital evidence you need to acquire. If it does, you can

then decide whether to acquire the evidence through the USB connection, or open the

drive enclosure and access the bare hard drive using the IDE or SATA write-blocked

connections since those connections will allow faster imaging.

Note: for smaller drive enclosures that operate using bus power, Forensic LabDock’s

write-blocked USB port may not provide enough bus power to operate the product.

Either power the enclosure from an external power source (e.g. AC adapter), or use the

optional USB bus power cable (sold separately).

1 2 3 4 5 6 7 8 9 10 11

Keine Kommentare

WiebeTech Forensic LabDock Bedienungsanleitung Seite 7